Menu
DIN3352 F5 PN10/PN16 Gate Valve

DIN3352 F5 PN10/PN16 Gate Valve

  • Model:Z45X-16
  • Size:DN50-DN600
  • Pressure:PN10, PN16
  • Body Materials:Ductile Iron GGG40, GGG50
  • Applicable Medium:Water etc
Send us Email
Category:

Description

Product Introduction

The valves disc is rubber-packed to get excellent sealing effect by the rubber’s resilient deformation. Non-rising resilient seated gate valves solve the problem in general gate valves such as leakage, rusting etc. and saves installation space. It is used widely in tap water industry, sewage treatment, shipping construction, petroleum, chemicals, food, pharmacy, textile, electric power, metallurgy and energy system’s pipeline to adjust and shut off fluids.
Body Material: Ductile Iron GGG40, GGG50
Disc Materials: Ductile Iron Coated with EPDM/NBR
Stem Materials: Carbon Steel, Stainless Steel 416, Stainless Steel 304, Brass, Bronze
Bolt: Carbon Steel, Stainless Steel 304, Stainless Steel 316
Gasket: EPDM, NBR
Cover: Ductile Iron GGG40, GGG50
O-ring: EPDM, NBR, Silicone
Thrust Bearing: Brass
Gland: Ductile Iron GGG40, GGG50
Dust Proof Gasket: EPDM/NBR
Hand Wheel: Ductile Iron GGG40, GGG50
End Connection: Flanged

Product Features
  1. The seal is designed with dustproof ring plus three “O”-seal ring, reliable sealing, on-line replaceable.
  2. Both gate and aluminum bronze bearing are in inside design good self lubrication ,high strength and can have the aluminum bronze bearing replaced without need to replace the gate integrally, after a long time use.
  3. Rubber wrapped gate anti-corrosion, good tightness.
  4. Advanced surface treatment, coated with non-toxic epoxy resign static powder, anti-corrosion, pollution-free, can be used drinking water pipeline.
  5. The body is designed without gate slot, the smooth passage will not get impurities filling up, more applicable for sewage working condition.
  6. The integral seal works reliably. For the high pressure seal, leaving zero leakage under 1.5 times nominal pressure and, for the low pressure one, under 0.02Mpa.

Bolted Bonnet
Replaceable O-ring
Rubber encapsulated wedge, Brass Wedge Nut.
Fusion bonded epoxy coated inside and outside, blue RAL 5017 200 Micron think.
Working pressure from -1 to +16 bar and working temperature from -10 to +80℃

Technical Parameters
DIN3352 F5 PN10/PN16
SIZE L(mm) H a(mm) d(mm) c(mm) x-n T(mm) f(mm) g(mm)
DN IN PN10/PN16 PN10/PN16 PN10 PN16
50 2″ 250 240 50 165 125 4-φ19 16.5 2 99
65 2.5″ 270 270 65 185 145 4-φ19 17 2 118
80 3″ 280 290 80 200 160 4-φ19 8-φ19 19 3 132
100 4″ 300 330 100 220 180 8-φ19 20 3 156
125 5″ 325 380 125 250 210 8-φ19 20 3 184
150 6″ 350 420 150 285 240 8-φ23 20 3 211
200 8″ 400 510 200 340 295 8-φ23 12-φ23 20 3 266
250 10″ 450 600 250 405 350/355 12-φ23 12-φ26 25 3 319
300 12″ 500 690 300 460 400/410 12-φ23 12-φ26 28 4 370
350 14″ 550 780 350 520 460/470 16-φ23 16-φ26 28 4 430
400 16″ 600 880 400 580 515/525 16-φ25 16-φ30 28 4 475
450 18″ 650 1000 450 615/640 565/585 20-φ26 20-φ30 32 4 565/585
500 20″ 700 1055 500 670/715 620/650 20-φ25 20-φ34 29 4 580
600 24″ 800 1260 600 780/840 725/770 20-φ30 20-φ36 38 4 680
Technical Standard
  1. Design and manufacture according to EN1171, DIN3352, EN1074-1 and 2.
  2. Face to face according to EN558-1 Series 15, DIN3202 F5
  3. Flange drilling according to EN 1092-2, ISO7005-2
  4. Pressure test according to EN 12266, ISO5208

Related products